Welcome to the official website of SAWA ENTERPRISES CO.,LIMITED!

Site:Home > News > News content
  • Vacuum insulation Cup maintenance method
  • Browse number:2310  Release time:2018/3/22
  • Maintenance method:

    Do not use the 

    1, long time, should be kept dry liner.

    2, to prevent odor and stains, please use clean and dry.
    3, due to the use of no clean water will leave a similar rust red spots, use warm water to diluted vinegar soak for 30 minutes after the wash, several identification method for insulation Cup
    The several following methods:
    1, the performance of vacuum insulation Cup simple identification method: boiling water is poured into the cup in the clockwise screwing bottle or cup cover 2-3 minutes to touch the cup body surface, if the cup body has the obvious warm phenomenon, that the product has lost the vacuum degree, can not achieve good insulation effect.
    2, seal recognition method: in the cup of water, in a clockwise direction stopper and a cup cover, a cup flat on the table, should have no water leakage; the cup cover and the cup mouth of the screw should be flexible, no gap.
    3, plastic parts recognition method: food grade plastic is characterized by low odor, bright surface, no burr, long service life, not easy ageing. The characteristics of ordinary plastic or plastic recycling is the smell, color gray, burr, easy aging of easy fracture of plastic.
    4, a simple identification method of capacity: the depth and the height of the shell is consistent, (phase 16-18MM) capacity and the nominal value fit. Some of the poor quality of insulation Cup in a cup, add the sand cement block to compensate for the weight loss. Error: Cup (pot) is not necessarily a good.
    5 stainless steel material, simple identification method: stainless steel material specifications, where 18/8 denotes the stainless steel material composition containing 18% chromium, 8% nickel, reached the standard materials, in line with the national food standards is the green environmental protection product, antirust, corrosion products. Ordinary stainless steel cup body color is pale and dark, if the brine into the concentration of 1% will produce rust after 24 hours, which contains some elements exceed the standard, the direct harm to human health.
Copyright © 2018 SAWA ENTERPRISES CO.,LIMITED